The main wire rope hoist is suitable for carrying heavy loads at relatively fast speeds and is the primary means of vertical access for men and materials in an. Wherever an elevator for inspection, emergency, or interlevel hoisting is required in mines and underground shafts, the Alimak rack and pinion elevator is the. Raise climbing, widely known as the Alimak mining method after the company that introduced it, is a variation on longhole stoping developed.
|Published (Last):||1 January 2005|
|PDF File Size:||6.29 Mb|
|ePub File Size:||11.68 Mb|
|Price:||Free* [*Free Regsitration Required]|
The stopes can also be mined in a shrinkage fashion, mininng added support gained from the broken ore in place. Avoiding repeat levels has slight time-saving effects during operation because it eliminates the further work, like fencing backfill, needed on each level. Since drills can only reach so far, the traditional approach demands sublevels about every 25 metres.
Our full team of experienced Raise Miners, Supervisors and Managers, ensure your project is carried alimwk meticulously, while meeting all budget and time constraints.
The installed support is also enhanced by the broken ore, which acts as dry fill while in place.
Raise climbing, widely known as the Alimak mining method after the company that introduced it, is a variation on longhole stoping developed for narrow-veined, tabular ore bodies. Experience has shown that raises from 75 to metres length are the most economical. Henstridge attributes the higher cost of Alimak mining to reliance on contractors; at Williams zlimak, that makes it 10 per cent more expensive than longhole stoping.
Ken McKirdy, chief engineer alimai Manroc, says the Alimak method provides benefits beyond ore access.
Raise (mining) – Wikipedia
The climber nests are always in the hangingwall. Mining The Alimak elevator is the perfect solution for underground as well as aboveground mining industry applications, such as pelletising plants, smelters, concentrators, and other ore processing plants.
Greg Dipple of UBC has discovered that certain mine tailings can be used for carbon sequestration, and the implications alima, be enormous.
We have a solid reputation when it comes to employing the safest and most productive techniques available. Manroc’s lateral development includes full excavation of access ramps, declines, drifts, and crosscuts. Ground support follows development and production drilling follows right after that. It is safest to take a few rings per blast, so that miss-holes or other blasting problems are accessible for correction.
Tinkering with the drill rig set-up allowed an entire ring of production holes to be drilled without repositioning the drill more than once. One of the disadvantages to mining long, straight raises is that it becomes difficult to follow high-grade ore.
A Leader in Alimak Mining
The down dip helps the toes break to the stope wall. Backfill Fill fence and piping if required. Less Cost With less development, faster ore access, better ground control, and faster overall mining, it is easy to see how raise mining will cost less than regular open stoping.
The production drill holes are oriented slightly down from along strike, which is also roughly perpendicular to that found in the regular open stoping method. Steelmaking coal price surge reinvigorates Canadian mines Kylie Williams.
Better Ground Control Cables can be installed right up the middle of the hangingwall, where they will do the most good. Once the climber nests are established, ore starts to flow. The Seabee mine had to adapt to this new cycle. Manroc, Williams and Orica Ltd.
After the alima is driven it often must be rehabilitated, subject to ground conditions, for the safety of production crews. Drawpoints can be driven from either footwall or hangingwall, depending on how the ore zone is accessed.
The holes are most often mechanically loaded with either ANFO or an emulsion explosive. The Saskatoon-based gold miner had increased its year-to-date gold production by 63 per cent overthanks in part to a successful implementation of allimak Alimak mining method at its Seabee gold mine in Saskatchewan.
Truck dump back slash if required. The sub-horizontal production drill hole direction allows the use of the undercut as a slot and because of the increased stope height, there will be significantly fewer of these than there would be slots required for regular open stoping in the same area.
At crushing plants, where the operator has to control feeders, bins, conveyors, etc. A ramp is not required and, in many minning, neither is the muck pass and ventilation raise of a regular stoping system.
An Elevator Into Darkness| The Alimak Raise Climber ‹ International Mining Industrial Photographer
Intuitively, geometry favors raise climber mining, in that access is gained to the centre of the stope hangingwall where the ground support does the most good.
Switching to a new drill, they drive cable bolts up the centre of the raise, grout them in place and drill production holes. The change in geometry and improvement in ground support allows stope heights in the order of 75 to metres, eliminating many sub-levels and their associated development.