# Reluctance and inductance relationship

### Inductance in Terms of Magnetic Reluctance and Magnetic Permeance

So by increasing the number of loops or turns within a coil, increases the coils inductance. Then the relationship between self-inductance, (L) and the number . Hi, say for example we have a magnetic core with a coil wound around, and if we introduce an airgap (i.e. increasing the reluctance), how is. Magnetic Devices II: Reluctance and Inductance. Up to now we have viewed . changes in x influence the relationship between these two variables. Consider a .

An example of the former design is shown in this photograph: This unit uses sliding copper contacts to tap into the coil at different points along its length.

The unit shown happens to be an air-core inductor used in early radio work. A fixed-value inductor is shown in the next photograph, another antique air-core unit built for radios.

## What is the relation between inductance and reluctance?

The connection terminals can be seen at the bottom, as well as the few turns of relatively thick wire: Here is another inductor of greater inductance valuealso intended for radio applications. Its wire coil is wound around a white ceramic tube for greater rigidity: Inductors can also be made very small for printed circuit board applications. Closely examine the following photograph and see if you can identify two inductors near each other: The two inductors on this circuit board are labeled L1 and L2, and they are located to the right-center of the board.

Two nearby components are R3 a resistor and C16 a capacitor. The following photograph shows just how small an inductor can be when packaged as such: Of course these inductors are very small in inductance value, but it demonstrates just how tiny they can be manufactured to meet certain circuit design needs.

### Transformer Cores, Reluctance and Permeability

In the electrical circuit an emf produced by a cell or battery drives a current around the circuit, which consists of a length of wire having some resistance R. The magnetic circuit also has a source of magnetic power in the form of a coil, supplied with an AC current.

Just as the external electrical source is called an electro motive force, the external magnetic source is called a magneto motive force mmfand is measured in ampere turns. The resistance to the flow of magnetic flux in the core is called Reluctance Rm Fig A coil the primary supplied with an AC current is wound around one side of the core to provide a source of mmf.

On the other side of the core a separate coil the secondary is wound, which supplies a measuring instrument to measure the amount of current in the coil.

### Answer for What is impedance , Reactance ,Reluctance ; Why Reactance are imaginary?

The current in this coil will be proportional to the amount of flux flowing in the core. This arrangement therefore provides a means of measuring magnetic flux.

• Inductance in Terms of Magnetic Reluctance and Magnetic Permeance
• Magnetic reluctance
• Module 11.2

A is the cross sectional area of the core and L is the mean length of the flux path around the core. Electrical resistance also depends not only on the dimensions of the conductor but also on the material of the conductor and its resistivity.

Relative and Absolute Permeability Permeability is often expressed as: Quoting the absolute permeability of materials used in cores would involve similarly awkward numbers.