Interfill is an easy to sand, finishing filler that corrects minor surface defects before the final coat. Soft and easy to use, you can apply it using a trowl, filling. A light weight two pack low to medium density epoxy based filling and fairing material. Interfill is an easy to sand, finishing filler that corrects minor surface defects before the final coat. For use over Interfill , it can be applied using a trowel.
|Published (Last):||1 January 2017|
|PDF File Size:||2.23 Mb|
|ePub File Size:||13.27 Mb|
|Price:||Free* [*Free Regsitration Required]|
Don’t have an account. Do not apply more than recommended WFT at any one time. Unterfill tali servizi, accetti l’utilizzo dei cookie da parte nostra.
You may also be interested in interfil following product s.
Call us on Remainders of Interfill cannot be disposed of through the municipal waste route or dumped without permit. Ventilation and Humidity Control: It is best to allow paints to harden before disposal. Do not discard tins or pour paint into water courses, use the facilities provided.
Once the sandable time has been exceeded, all fillers should be sanded before overcoating to promote good adhesion. Interfill may be overcoated with itself as soon as it has cured enough not to be lifted during the screeding process. We stock a wide range of items such as: Vacuum clean for best results. Shopping Basket You have no items in your shopping basket.
Interfill is a technically advanced, easy sand Epoxy Finishing Fairing Compound for use over Interfill profiling filler to correct minor surface defects before application of finishing coats.
View Comparison Go to login page Close. Interfill should be kept in securely closed containers during transport and storage.
Interfill – Seaware – Wholesale Marine & Fastenings
Wash with Super Cleaner, rinse with fresh water and allow to dry. Terms and Conditions Contact us.
Some Important Points Do not use unless mixed thoroughly with the curing agent at specified ratio. Mix the two components thoroughly to an even colour.
Sand smooth with grit paper.
Remove any dust from the surface. All previous coatings should be removed back to solid material and filled with Interfill Quick Overview Interfill is a technically advanced, easy sand Epoxy Finishing Fairing Compound for use over Interfill profiling filler to correct ihterfill surface defects before application of finishing coats.
Matt Specific Gravity 0.
International Interfill 833 Part B 5 Lt #458COL1126
Pack of 5 liters. Log In Login If you have an account with us, please log in. Designed and developed by Aztek Company no: Description Downloads Part B. Maggiori informazioni Read more.
Apply firmly in a spreading interfilll.
Thinner International GTA for equipment cleaning only. The information given in this sheet is not intended to be exhaustive. Read the label safety section for Health and Safety Information. After 3 months the filler must then be re -sanded before overcoating. Interfill is a finishing filler, easy to sand for use over Interfill to correct minor imperfections before applying the finishing coats.
I cookie ci aiutano a fornire i nostri servizi. Remove all sanding residue using a clean air line and sweeping with a clean brush or broom.
Recommended wet film thickness WFT per coat microns by trowel or palete knife. Add to Basket Add to Compare. Exposure to air and extremes of temperature should be avoided. Disposal of remainders must be arranged for with local authorities.